Vents TT UN Aspiratore Bipotenza Cablato IEC – Con Termostato e Controllo Velocità.
The VENTS TT and VENTS TT PRO fans are featured with wide capabilities and high performance of axial and centrifugal fans and are specifically designed for supply and exhaust ventilation of premises requiring high pressure, powerful air flow and low noise level.
The fans are compatible with round air ducts from Ø 100 to 315 mm. Exhaust ventilation systems based on the VENTS TT fans are the best solution for ventilation of bathrooms and kitchens and other humid premises as well for ventilation of flats, cottages, shops, cafes, etc.
The fan casing is made of high quality and durable materials: ABS plastic for the VENTS TT series or low-flammable polypropylene for the VENTS TT PRO series.
The removable impeller and motor block with a terminal box is fixed to the casing assembled with the spigots by means of special clamps with latches.
This makes the fan maintenance fast and easy. The fan maintenance does not require total disassembling. Just pull out the central block from the casing and perform required servicing. All the models may be equipped with a regulated timer with turn-off delay adjustable from 2 to 30 min.
The models of VENTS TT series are equipped with a single phase motor and are available in single or two speed modifications. Some dimension types are available with a more powerful motor (VENTS TT…S). The models of VENTS TT PRO series are equipped with single phased double-speed motors with low energy demand.
The motors have thermal overheating protection to prevent the motor overload. The ball bearings extend the motor service life up to 40 000 hrs. at non-stop operation. The motor has IP X4 ingress protection rating.
What fan do i choose?
For selecting the more suitable fan for your grow-room, you can follow this simple calculation, based on the number of air changes needed per minute, in a grow room.
– Measure the volume of air of the room, by multiplying the length by the width by the height (in meters) of the room. For example. One room 3m x 4m with a high ceiling 2m has an air volume of 3 x 4 x 2 = 24m3.
– Multiply this number by 70. This determines the amount of air that is necessary to move every hour, showing the adeguate fan to your needs.